If you use reboot, the device will still not come back, but the HDD will keep spinning ). OpenWrt 17. (Note: poweroff is still needed here so the HDD will be put into standby/idle. Run this script as root when you want to poweroff: #!/bin/shĮcho 473 > /sys/class/gpio/export # This is GPIO1 on the GPIO-Controller at 0x4e0000000Įcho out > /sys/class/gpio/gpio473/directionĮcho 1 > /sys/class/gpio/gpio473/value # drive it high Get access to more than 30 Cloud Drives, such as Google Drive, Box, Dropbox, MEGA, OneDrive, FTP and many more. (If there was support for DT Overlay, this could be done without rebooting) Otixo enables you to connect all your Cloud Drives and to collaborate with your Team. Reboot the MBL (this is necessary, to get the enable-button line reassigned/free) Replace the /boot/boot/apollo3g.dtb on your MBL with this apollo3g.dtb The downside is, you have to do some stuff with a script or by hand While the GPIO_POWEROFF isn't available (as in: not selected in the kernel config and no LEDE-Module) in the standard LEDE installation, you can use the devicetree changes to power off the MBL with a standard Installation. To use it, you create a new Space, drag files to it from any of your cloud services. All this while keeping the Booke Watchdog around. One of Otixos selling points is the way it lets you share files with others, using a feature called Spaces. It basically allows for the system to go into a state were the harddrive is effectively powered off indefinitely and it's not doing anything. I'm just not really fond of a safe shutdown meaning "wait until LED is blue, then be super quick about think this will work in a pinch. Probably the state directly after (re)boot before the drive engages again. Step 1 ) First you need to turn on SSH in the MyBookLive dashboard. I wonder what would be the best way to get to a state where the drive can safely be powered down. You should see the "System Halted." message (or parts of it) over the serial console. If you want to confirm it, you could attach a serial cable to the MBL' s serial port and load up the original firmware and try to shutdown the system. Printk(KERN_EMERG "System Halted, OK to turn off power\n") The machine_power_off in this kernel looks like this: void machine_power_off(void) So, the watchdog isn't initialized and can never fire. I did take a peek and the CONFIG_BOOKE_WDT option is not enabled. We are actively investigating and we will provide updates to this thread when they are available. At this time, we recommend you disconnect your My Book Live from the Internet to protect your data on the device. We understand that our customers data is very important. The WD's config is located in packages/kernel_2.6.32-11/arch/powerpc/configs/44x/apollo_3G_nas_defconfig. The My Book Live device received its final firmware update in 2015. WD uploaded the GPL code on their website. Hij doet het dus wel en is gewoon benaderbaar. Ik kan wel via de Browser (chrome) inloggen op de Administrator toepassing op de MyBookLive en instellingen van de server e.d. Het is een Western Digital MyBookLive server van 3 TB. Well, it's a way to achieve the goal, I guess. Sindsdien kan ik de bestanden op de NAS server niet meer benaderen via Windows Explorer. So if I understood that correctly, the (ancient) Debian-based firmware just put the system into never-ending nop after shutdown. The APM821xx does not really have a way to poweroff or even halt.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |